Formula HSF

NATIONWIDE INDUSTRIAL CHEMICAL SUPPLIER

Durable Hi-Gloss FLOOR FINISH

High solids formula beautifies, protects, and preserves both resilient and non-resilient flooring. Finishes and seals newer or older floors. For composition, terazzo, and marble floors. Developed specifically for school, institutional, and industrial use.

PRODUCT DETAILS

Directions

Flooring must be thoroughly cleaned prior to use. Scrub floor with synthetic pad and cleaner solution to remove any traces of wax, dirt or old soap film. Rinse thoroughly and allow ample drying time before applying FORMULA HSF.

Apply with mop or applicator. DO NOT apply product wet; wring out excess and apply in even, thin coatings. Dries in approximately 30 minutes. Two coats are recommended in initial use for normal wear areas; five coats for heavy traffic areas.

Allow one hour drying time between coats. Flooring will dry to a durable, slip-resistant finish requiring easy maintenance.

RECOMMENDED USES

• Seals surfaces in a single coat. Deep, brilliant gloss with high durability.
• Detergent scrubbable and resistant. Spray buffs beautifully.
• Resists black heel marks and protects against powdering.
• Freeze/thaw stability rating: 3 cycles
• Static coefficient of friction which meets or exceeds 0.5 ASTM method D-2047-72.

NET CONTENTS

55 US Gallons

Safety Data Sheet

CAUTION

EYE IRRITANT. MAY CAUSE SKIN IRRITATION WITH PROLONGED

CONTACT. Avoid contact with skin, eyes, and clothing. Wear protective gloves when using this product. Avoid breathing of vapors or mists. Do not take internally. Keep out of the reach of children. For professional use only.

FIRST AID

EYE CONTACT: Flush with water for 15 minutes. If irritation persists, call physician. SKIN CONTACT: Wash thoroughly with water. If irritation persists, call a physician. INGESTION: Immediately drink large quantities of water. Do not induce vomiting. Call Poison Control Center or physician immediately.